24mm Eye Bolts

 

General Features

 

Two types of 24mm Eye Bolts are available for hanging of light services in mining applications.

  • Available with a M24 x 150mm long rolled thread to accept 24mm expansion shell mechanical anchor, refer to data sheet B4.9, or slotted 150mm long x 2.5mm wide to accept a steel wedge, refer data sheet B4.8.
  • Inside diameter of eye is 75mm.
  • Nominated bolt length is measured from under eye to the end of the bolt.
  • Feed material around eye is lapped back along the bolt shank for a minimum of 50mm before being fillet welded on both sides to AS1554.1-1991.
  • Manufactured from mild steel grade.
  • May be supplied hot dipped galvanized. Refer to section H for specifications.

 

 

PackagingNotes
  • Bundles of 10 units or larger quantities supplied on pallets

 

  • Only DSI rock bolt components should be used in order to obtain full performance of the bolt system.
  • DSI's Mining Products Division is Quality Assured to ISO 9001:2000, Registration No.QAC/R61/0315.