20mm Eye Bolts

 

General Features

 

20mm Eye Bolts are available for hanging of light services in mining applications.

  • Available with a rolled thread M20 x 150mm long to accept a 20mm expansion shell mechanical anchor, refer to data sheet B4.9.
    Note: The slotted option as per 24mm Eye Bolts is not available in 20mm Eye Bolts.
  • Inside diameter of eye is 75mm.
  • Nominated bolt length is measured from under the eye to the end of the bolt.
  • Feed material around eye is lapped back along the bolt shank for a minimum of 50mm before being filet welded on both sides to AS1554.1-1991.
  • Manufactured from round bar feed in AS1442/U1040 material.
  • May be supplied hot dipped galvanized. Refer to section G for specification.

 

 

PackagingNotes
  • Bundles of 10 units or larger quantities supplied on pallets

 

  • Only DSI rock bolt components should be used in order to obtain full performance of the bolt system.
  • DSI's Mining Products Division is Quality Assured to ISO 9001:2000, Registration No.QAC/R61/0315.