New Product Leaflets

Rock and Roof Bolts

Rock Bolt Accessories

W Strap and Mesh

Drilling Products

Spade Type - Centre Flush, Extra Flush & Side Flush

Spade Type - Small Drop Centre, Centre Flush & Extra Flush

Spade Type Large Drop Centre, Centre Flush & Extra Flush

Two Wing Type - Negative Rake, Centre Flush & Extra Flush

Two Wing Type - Positive Rake & Extra Flush

Two Wing Type - Positive Rake for Coal Ribs

Two Wing Type - Concentric & Negative Rake

Two Wing Type - Coal Auger

Wet Drilling Type with Internal Drive End Seal

Wet Drilling Type with External "O" Ring Drive End Seal

Wet Drilling Type with Plain Spigot Drive End

Wet Drilling Type with Long Spigot Drive End

Wet Drilling Type with Square Drive End

Dry Drilling Type - Fabricate Scroll

The Square Thread System

With Hexagon Drive Ends & Hexagon Sockets

With Square Drive End & Hexagon Sockets for Rotary Applications

For Pneumatic Rotary Impact Drilling Machines

For Hydraulic Rotary Drilling Machines

For HI-TEN Strand Bolts

Oz Combination Spanner

For Hand Held Machines

Drill Rod / Drill Bit Adaptors

Resin Anchoring

Conference Papers

Convert Technical Units

DSI-Mining Australia > Products > Drilling Products > Wet Drilling Type with External "O" Ring Drive End Seal

Wet Drilling Type with External "O" Ring Drive End Seal

Physical Properties

Drill Machine Drive	Hex. AF	Bit Thread	Length in mm
	19	8w
PW	22 1922	10w M14 M16	600	900	1200	1600	1800	2100	2400	3000
	22 1922	10w M14 M16

Example: PW 19 8W 1200 = Pixie Ext ‘O’ Ring 19mm AF drill rod 1/2" whitworth bit shank x 1200mm long.

General Features

Drill Rods are manufactured from High Strength Chrome Molybdenum Alloy Steel for high strength and wear resistance.
Available in 19mm AF and 22mm AF hexagon for water flushing.
The drill rod drive end has an external seal which provides a seal against water loss through the machine's chuck.
Bit end available to suit all drill bit threads.
For selection of appropriate drill bits refer to Data Sheets in section D1.

Packaging

Bundles of 5 with ends protected by polyethylene wrap.
Export rods packed in wooden crates.

Notes

Only DSI rock bolt components should be used in order to obtain optimum performance of the bolt system.
DSI's Mining Products Division is Quality Assured to ISO 9001:2000, Registration No.QAC/R61/0315.

PRINTED December 2006: All dimensions, weights, quantities and specifications are those applicable at the time of publication and may be amended from time to time.